Problem Surfaces
FILL-FLEX
Fill-Flex is a ready-to-use flexible filler for gaps and cracks, perfect for both interior and exterior surfaces. It adheres to plaster, masonry, prim...
- Adheres to plaster, masonry, primed wood & paintwork
- Highly flexible: will not crack
- Moves with the substrate
- No need to spot prime
- Characteristics
- Documents
- supports
- Precaution for use
- Implementation
Characteristics
Fill-Flex is a ready-to-use flexible filler for gaps and cracks, perfect for both interior and exterior surfaces. It adheres to plaster, masonry, primed wood, and paintwork, ensuring strong adhesion and durability. Highly flexible, it moves with the substrate to prevent cracking over time. With no need to spot prime, it offers a smooth application and can be overcoated with any filler, paint, or wall coating for a flawless finish.
Code
TTFIBACP310GB
Destination
/
Usage function
Surface treatment
Application mode
Manual
Doubling time between 2 layers
As soon as the filler is dry.
Supports
Fill-Flex can be applied to any substrate either unpainted or painted:
- Gypsum plaster, plaster tiles, plasterboards, mortars
- Old painted surfaces, concrete, cellular concrete
- Cement, breeze blocks, bricks, stones and primed wood.
- Gypsum plaster, plaster tiles, plasterboards, mortars
- Old painted surfaces, concrete, cellular concrete
- Cement, breeze blocks, bricks, stones and primed wood.
Recoverable by
Fill-Flex can be overcoated with any type of filler, paint or wall coating.
Application thickness
Up to 1 cm.
Mixing rate
Ready to Use.
Painting time
24 to 48 Hours.
Usage time
No limit.
Application tools
Blade.
Putty knife.
Putty knife.
Temperature and hygrometry of implementation
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
Adhesion filler/substrate (EN 16-566): > 0.8 Mpa.
Average consumption g/m2
/
IAQ Ranking
/
Finished product color
White.
Conservation
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Cleaning
Water.
Available in
- Cartridge 0.31 KG
- Tub 1 KG
Supports
Fill-Flex can be applied to any substrate either unpainted or painted:
- Gypsum plaster, plaster tiles, plasterboards, mortars
- Old painted surfaces, concrete, cellular concrete
- Cement, breeze blocks, bricks, stones and primed wood.
- Gypsum plaster, plaster tiles, plasterboards, mortars
- Old painted surfaces, concrete, cellular concrete
- Cement, breeze blocks, bricks, stones and primed wood.
Precaution for use
Once dry, It must be painted or overcoated.
Do not apply on damp grounds.
Implementation
1
Apply manually using a coating blade or trowel.
2
.jpg)
Fills up to 1cm deep
3
Can be painted 24-48 hours after application, dependant on the substrate, coat thickness, and ambient conditions