Problem Surfaces
ANTI-DAMP RENDER HUMIBLOCK
Breathable barrier for damp, Porous & untreated masonry :
Controls damp on interior and exterior surfaces while letting them breathe due to its wat...
Controls damp on interior and exterior surfaces while letting them breathe due to its wat...
- Controls damp
- For basements & garages
- Exteriors: blocks water penetration
- Interiors: a barrier to water, while letting substrates breathe
- No need to seal the substrate *
- Characteristics
- Documents
- supports
- Precaution for use
- Implementation
Characteristics
Breathable barrier for damp, Porous & untreated masonry :
Controls damp on interior and exterior surfaces while letting them breathe due to its water-vapour permeability. On exteriors it blocks water penetration, on interiors it acts as a water barrier while letting the substrate breathe. Ideal for cellars and basements. Using a brush or trowel, it can be applied to damp and raw masonry substrates.
The typical recommended application thickness is 1.5mm.
Warning - Please carefully follow usage instructions and refer to the technical data sheet.
Controls damp on interior and exterior surfaces while letting them breathe due to its water-vapour permeability. On exteriors it blocks water penetration, on interiors it acts as a water barrier while letting the substrate breathe. Ideal for cellars and basements. Using a brush or trowel, it can be applied to damp and raw masonry substrates.
The typical recommended application thickness is 1.5mm.
Warning - Please carefully follow usage instructions and refer to the technical data sheet.
Code
TTHUMIB06GB
Destination
/
Usage function
Levelling uneven surfaces
Application mode
Manual
Doubling time between 2 layers
As soon as the filler is dry.
Supports
Cement, concrete, cellular concrete, breeze blocks, bricks, stone
Interior or exterior raw masonry, dry or damp.
Substrates to be treated must be stripped down to the masonry before application
Interior or exterior raw masonry, dry or damp.
Substrates to be treated must be stripped down to the masonry before application
Recoverable by
Any type of Toupret filler, paint or wall coating
Application thickness
Up to 1 cm.
Mixing rate
/
Painting time
12 to 24 Hours.
Usage time
/
Application tools
/
Temperature and hygrometry of implementation
Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%.
Adhesion
Adhesion filler/substrate (EN 16-566): > 0.8 Mpa.
Average consumption g/m2
1500.00
IAQ Ranking
/
Finished product color
White.
Conservation
Product guaranteed for 6 months from purchase, in original package and stored away from humidity.
Cleaning
Water.
Available in
- Bag 6 KG
Supports
Cement, concrete, cellular concrete, breeze blocks, bricks, stone
Interior or exterior raw masonry, dry or damp.
Substrates to be treated must be stripped down to the masonry before application
Interior or exterior raw masonry, dry or damp.
Substrates to be treated must be stripped down to the masonry before application
Precaution for use
Dangerous. Follow the safety precautions and refer to the current technical data sheet.
Implementation
1
Mixing rate: Add 220ml water per 1kg powder (22%).
Add powder to water at room temperature. Stir until smooth.
Add powder to water at room temperature. Stir until smooth.
2
Apply manually using a coating blade or trowel between 2mm-1cm deep.
3
Can be painted 24-48 hours after application, dependant on the substrate, coat thickness, and ambient conditions