PLASTERBOARD FINISHING SOLUTIONS
J-MIX - DRY WALL JOINT COMPOUND
J-MIX is a versatile interior joint compound designed for plasterboard seams and surface finishing. Its high adhesive strength, smooth white texture, ...
- High filling power
- Up to 5 mm
- High adhesive thickness strength
- Easy sanding
- Characteristics
- supports
- Precaution for use
Characteristics
J-MIX is a versatile interior joint compound designed for plasterboard seams and surface finishing. Its high adhesive strength, smooth white texture, and easy sanding make it perfect for clean, professional results up to 5 mm thick.
Code
ME_JMIX25
Destination
/
Usage function
Skimming plasterboard
Jointing plasterboard
Shaping and form work
Levelling uneven surfaces
Filling and repairing (holes, gaps, cracks)
Jointing plasterboard
Shaping and form work
Levelling uneven surfaces
Filling and repairing (holes, gaps, cracks)
Application mode
Manual
Doubling time between 2 layers
Second coat as soon as the filler is hard and dry to the touch.
Supports
Can be applied on any type of plasterboards with thin edges with or without insulating parts and plaster carton boards.
Recoverable by
Can be coated with a primer or a surface filler.
Application thickness
Up to 5 mm.
Mixing rate
Ready to Use.
Painting time
/
Usage time
No limit.
Application tools
Putty knife.
Taping knife.
Taping knife.
Temperature and hygrometry of implementation
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa.
Average consumption g/m2
300.00
IAQ Ranking
/
Finished product color
White.
Conservation
Product guaranteed for 12 months from purchase, in original package and stored away from sunlight and frost.
Cleaning
Water.
Available in
- Bucket 25 KG
Supports
Can be applied on any type of plasterboards with thin edges with or without insulating parts and plaster carton boards.
Precaution for use
Do not apply on bonded coatings.
Do not apply over polystyrene.
Do not apply on damp grounds.