PLASTERBOARD FINISHING SOLUTIONS
EC3 - JOINTFILLER
Toupret EC3 is a multi-purpose interior powder adhesive for manual application. Toupret EC3 can be applied to new or renovated, rough or painted surfa...
- All thickness on rough substrates
- Easy to sand
- Fills, joint and face filler
- Taping and jointing plasterboards
- White and fine
- Characteristics
- Documents
- supports
- Precaution for use
- Implementation
Characteristics
Toupret EC3 is a multi-purpose interior powder adhesive for manual application. Toupret EC3 can be applied to new or renovated, rough or painted surfaces and can be covered with all types of plaster, paint and wall coverings. Toupret EC3 can be used to glue, fill and coat tiles and joint strips.
Code
EC320
Destination
/
Usage function
Filling and repairing (holes, gaps, cracks)
Levelling uneven surfaces
Jointing plasterboard
Skimming plasterboard
Levelling uneven surfaces
Jointing plasterboard
Skimming plasterboard
Application mode
Manual
Doubling time between 2 layers
As soon as the filler is dry.
Supports
New or renovated substrates, either unpainted or painted: Gypsum plaster, plaster tiles, plasterboards Old painted surfaces Cement, concrete, cellular concrete, breeze blocks, bricks, stones.
Recoverable by
Any type of paint or Toupret filler.
Application thickness
No depth limitation.
Mixing rate
/
Painting time
24 to 48 Hours.
Usage time
/
Application tools
Taping knife.
Trowel / smoother.
Trowel / smoother.
Temperature and hygrometry of implementation
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa.
Average consumption g/m2
1100.00
IAQ Ranking
/
Finished product color
White.
Conservation
Product guaranteed for 12 months from purchase, in original package and stored away from humidity.
Cleaning
Water.
Available in
- Bag 5 KG
- Bag 20 KG
Supports
New or renovated substrates, either unpainted or painted: Gypsum plaster, plaster tiles, plasterboards Old painted surfaces Cement, concrete, cellular concrete, breeze blocks, bricks, stones.
Precaution for use
It is advisable not to reshuffle the dough when it begins to harden.
Do not apply on bonded coatings.
Do not apply over polystyrene.
Do not apply on damp grounds.
Do not apply on exterior surfaces.
Do not apply in direct sunlight, overheated or frozen substrates.
Implementation
1
Mixing rate: 50% water (i.e. 0.5 litre per kg of powder)
Knead the paste obtained until you obtain a homogenous paste with a thick consistency.
Knead the paste obtained until you obtain a homogenous paste with a thick consistency.
2
2 to 3 kg for fitting plasterboard tiles, depending on the thickness of the tiles
3
Application thickness: No thickness limit.
4
Application: With a coating knife, smoothing tool or coating blade.